ADT-938 - Pompe de calibration hydraulique (sans huile)

ADT-938 - Pompe de calibration hydraulique (sans huile) - Prisma Demande de devis

Model : ADT-938

Range : 85% vacuum to 15,000 psi (1,000 bar)

The ADT-938 Hydraulic High Pressure Test Pump is specially designed for calibrating oil-free pressure measuring instruments in the range of 85% vacuum to 15,000 psi (1,000 bar). All parts used in the pump have been carefully cleaned to remove oil. The pump uses water as the media. With the patented screw press technology, high pressures can be easily generated, as well as increased and decreased smoothly. A specially designed shut-off valve makes the pressure as stable as possible during calibration. With no check valve (non-returning valve), the ADT-938 avoids the troublesome leakage issues that is usually experienced with hand pumps and allows for minimal maintenance. Three hand-tight connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The ADT-938 is an ideal comparison test pump for calibrating oil-free pressure measuring instruments such as test gauges, indicators or transducers in the laboratory.

  • CaractĂ©ristiques
  • Fiche technique
  • SpĂ©cifications

• High Pressure
Generates pressure up to 15,000 psi (1,000 bar)

• Durable and Minimal Maintenance
Patented screw press technology, without non-returning valve inside that is usually used on troublesome hand pumps.

• Easy-to-use
With the patented screw press technology, high pressures can be generated easily, as well as increased and decreased smoothly

• Extremely Low Leakage
Patented screw press technology replaces troublesome check valves (non-returning valve) in most hand pumps which practically eliminates leakage.

• Hand-tight Quick Connectors
Allows easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches.

 

Télécharger la fiche technique (PDF ADT-938)

• Media:
Deionized water

• Pressure Range
85% vacuum to 15,000psi (1,000bar) positive pressure.

• Material
Ram/adapters: SS
Body: SS/aluminum
Seals: Buna-N

• Connection
Hand-tight connectors for both test gauge and reference gauge.
Test Gauge Connection: 1/4NPT female, 1/4BSP female, M20X1.5 female
Reference Gauge Connection: 1/4NPT female, 1/4BSP female, or M20X1.5 female

• Dimensions
Height: 9.1" (230 mm)
Base: 20.5" (520 mm) x 14.2" (360 mm)

• Weight:
35.2 lb (16 kg).

• Warranty:
1 year

Â