PRODUCTS
- Pressure measurement
- Thermometers & Temperature Sensors
- Flowmeters
- Level measurement
- Table instruments
- Supervision Software
- Industrial automation
- Calibration
- Master Pressure Gauge
- Digital Pressure Calibrator
- Process Calibrator
- Automated Pressure Calibrator
- Intelligent Digital Pressure Modules
- Temperature Calibrators
- Pressure Calibrators
- Calibration Hand Pumps
- ADT-901 Pneumatic Low Pressure Test Pump
- ADT-912 Pneumatic Low Pressure Test Pump
- ADT-914 - Pneumatic Pressure Test Pump
- ADT-916 - Pneumatic Pressure Test Pump
- ADT-917 - Pneumatic Pressure Test Pump
- ADT-918 - Pneumatic Pressure Test Pump
- ADT-919A - Pneumatic High Pressure Test Pump
- ADT-920 - Pneumatic High Pressure Test Pump
- ADT-925 - Hydraulic Pressure Test Pump
- ADT-927 - Hydraulic Pressure Test Pump
- - ADT-936 Hydraulic High Pressure Calibration Pump
- ADT-937 - Hydraulic Pressure Calibration Pump (Skydrol Oil)
- ADT-938 - Hydraulic Pressure Calibration Pump (oil-free)
- ADT-949 - Hydraulic Ultra-High Pressure Calibration Pump
- Pneumatic 2 bar
- Pneumatic 10~40 bar
- Hydraulic 200/350 bar
- Hydraulic 700/1000 bar
- Dead Weight Testers
- Accessories
ADT-917 - Pneumatic Pressure Test Pump
Model : ADT-917
Range :Â 95% vacuum to 1,000psi (70bar)
The ADT-917 Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 1,000psi (70bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar). A specially designed shut-off valve makes the pressure as stable as possible during calibration. A built-in gas-liquid isolator protects the pump from moisture and dirt to reduce the need for maintenance. Two hand-tight quick connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The ADT-917 is an ideal comparison test pump for pressure instruments calibration.
- Datasheet
- Features
- Specifications
• Portable
Only 5.7 lb
• High Resolution
10 Pa (0.1 mbar)
High-quality screw press for fine pressure adjustment
• Great Stability
A specially designed shut-off valve makes the pressure as stable as possible during calibration.
• Durable and Minimal Maintenance
Built-in gas-liquid isolator protects the pump from moisture and dirt.
• Easy-to-use
Pressurized to desired pressure by the lever directly and make fine adjustment. No high-pressurized valve needed.
• Hand-tight Quick Connectors
Allows easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches.
Â
• Media:
Air.
• Generated Pressure Range
95% vacuum to 1,000 psi (70 bar) positive pressure
• Adjustment Resolution:
10 Pa (0.1 mbar).
• Material:
Ram/adapters: SS
Body: SS/aluminum
Seals: Buna-N
• Connection:
Hand-tight connectors for both test gauge and reference gauge.
• Test Gauge Connection:
1/4NPT female, 1/4BSP female, or M20X1.5 female
Reference Gauge Connection: 1/4NPT female , 1/4BSP female, or M20X1.5 female
• Dimensions:
Height: 5.5'' (140 mm)
Base: 12.4" (315 mm) x 7.8" (198 mm)
• Weight:
5.7 lb (2.6 kg).
• Warranty:
1 year
Â