• Pressure Range
Pressure generated by built-in pump and controlled automatically from 90% vacuum to 600 psi (40 bar)
Pressure measured with external pressure modules (160 series) to 10,000 psi (700 bar)
Accuracy (Fully temperature compensated)
0.01%FS(ADT761-BP)

• Control Stability
<0.005%FS

• Contamination prevention system
Built-in filter and liquid trap with venting system prevent contamination of the calibrator
Solid particles can be blocked by built-in filter
A small amount of Liquid can be collected by the built-in liquid trap
Both solid particles and liquid can be blown out through the venting system

• Automation and Test Program
Fully Automated pressure calibration
Task preset and auto run
Auto step

• Easy to Use
User friendly interface
Intuitive icon driven menu structure

• Sourcing and Measuring electrical signals
Measure mA with 0.01%RD + 1.5μA accuracy
Measure V with 0.01%RD + 1.5mV accuracy
Source/sink 0 to 22mA current
24 VDC loop power supplied to pressure transmitter during test
Automated switch test

• Misuse Protection
Up to 30V misuse protection on any two sockets

• Display
7" LCD color screen (800X480)

• Documenting and data logging
Task management capability
Internal memory stores 200 tasks
Download tasks and upload results

• HART Communication capability
Support HART instrumentation

• Rechargeable battery:
Rechargeable battery with up to 8 hours operation between charges

• Leak testing:
Apply leak test to an external pressure system to determine the magnitude of pressure variations due to leaks

• Pipeline Protection:
Special design the pipeline layout to avoid possible blockage and leakage

• Portable:
Only 12.4 lb

• Multi Lingual Interface
English, German, French, Italian, Spanish, Portuguese, Simplified Chinese
(Traditional Chinese, Japanese and Russian are available per request)

• NIST Traceable:
NIST traceable calibration with data (included)

 

• Control Stability
<0.005%FS;

• Pressure Connections
One ADT100-761 Hose Test Kit with quick connector (included except with ADT761-LLP)
1/8 BSP female connector on calibrator
Two 1/4NPT(or 1/2NPT, 1/4BSP, M20×1.5) female hand-tight connectors on the external pressure manifold (included except with ADT761-LLP)

• External Pressure Module Connection
External pressure module connector

• Electrical Connection
0.156 inch (Ø4mm) banana sockets

• Documenting and data logging
Task management capability
Internal memory stores 200 tasks
Download tasks and upload results

• Display
7" LCD color screen (800×480)
Display rate: 5 readings per second

• Pressure Units
hPa (ADT761-BP)

• Power
Battery: Rechargeable Li-ion Polymer battery (included)
Li-Battery working time: ~8 hours
Recharge time: ~3 hours
External Power: 110/220V Power adapter (DC 27 V) (Included)

• Environmental Specification:
Operating temperature: 32°F to 122°F (0°C to 50°C)
Compensated Temperature: 32°F to 122°F (0°C to 50°C)
Storage temperature: -20°C to 60°C
Humidity: <90%, non-condensing

• European Compliance:
CE Marked

• Communication
RS232 (DB9/F, environmentally sealed)
Baud rate: 2400, 4800, 9600, 19200, 38400, 57600, 115200
Data length: 7 Bits, 8 Bits
Stop bit: 1 Bit, 2 Bits
Address: from 1 to 121

• Dimension
11.65" X 7.32" X 7.09"(296mm X186mm X180mm)

• Weight:
12.4 lb (5.6 kg)

• Warranty:
18 months

 

Download the datasheet (Automatic pressure calibrator PDF)