Thermowells

Thermowells - Prisma Request a quote

Various Types of Thermowells

 

  • Bar Stock Threaded (BT)
  • (Process threads NPT, BSP or Metric)
  • Bar Stock Flanged (BF)
  • (Flanges as per ANSI, BS or DIN )
  • Bar Stock Weld In (BW)
  • Fabricated Threaded (FT)
  • Fabricated Flanged (FF)
  • Fabricated Weld In (FW)

 

Barstock Thermowell is normally offered up to an insertion length of 600mm. Fabricated Thermowells are recommended above 600mm. If required, insertion length can be determined by performing wake frequency calculations, in accordance with PTC 19.3. Welding (tig welding process) of the Thermowell is performed by professional and approved welders following practice laid down in the ASME code and weld joints can be 2 tested up to 600 kg/ cm . Bore concentricity within 10% of wall thickness can be checked by radiography or ultrasonic method. Special material tests such as ultrasonic test for flaw detection are also available. For steam/ feed water service, an IBR certificate in form IIIC can be issued.

 

Routine Tests

Type Tests
  • Chemical Analysis
  • Dimensional
  • Hydro Test
  • Dye Penetration
  • Bore Concentricity
  • Physical
  • Microstructure
  • Post Weld H/T (if specified)
  • NACE Compliance
  • Radiography
  • Ultrasonic
  • Physical Testing

 

 

 

 

 


endress hauser wika keller afriso omega elster kimo ge dwyer baumer

  • Datasheet
  • Informations

Download the datasheet répéteur RS422/485 (PDF Thermowells)

You want to get a quote, please click on the link and fill in the form. Note that our prices are digressive according to quantities.

 

For more information or any specific request, please contact our services. We shall get back to you as soon as possible.