PRODUCTS
- Pressure measurement
- Thermometers & Temperature Sensors
- Flowmeters
- Level measurement
- Pulse Radar Level Transmitter
- Guided Wave Radar Level Transmitters
- Magnetostrictive Level Transmitter
- Ultrasonic Level Transmitters
- Level Gauge
- Capacitance Level Transmitter
- Magnetic Level Transmitter
- Hydrostatic pressure level transmitters
- Level Switch
- DISPLACER TYPE MAGNETIC LEVEL SWITCH - DSI
- Compact Displacer Level Switch for Water ‐ CDSI
- VERTICAL LEVEL CONTROL - VLCI
- CHAMBER FLOAT MAGNETIC LEVEL SWITCH – CFSI
- Top Mounted Direct Insert Type
- Side Mounted Direct Insert Type
- External Cage Chamber SMLS/2000
- External Cage Chamber - TMLS/2000
- Top Mounted Float Operated-TMLS/4000
- Top Mounted Displacer Operated TMLS/3000
- Table instruments
- Supervision Software
- Industrial automation
- Calibration
- Accessories
Side Mounted Direct Insert Type
Series SMLS/1000
Direct Insert Float Operated
Prisma Instruments offers Side Mounted Level Switches for single level set point. This is trouble free, consistent and inexpensive solution to control Level in the tanks / vessels.GIC offers two types of Direct Mounted Level Switches:
- Series SMLS/1000
- Series TMLS/1000
Side Mounted Direct Insert Type
This is direct mounted type level switch. This type uses counterbalance principle. It consists of Float, Float Stem with counterbalance weight and switch mechanism with magnet attracter. To ensure the safety and reliability GIC offers heavy wall floats. In this type of Level Switch Float held in horizontal position and moves upwards and downwards with rising and falling level in the tank / vessel. This movement results in a rotary motion of the attracter causes actuation of microswitch. To improve reliability it employs dual opposed magnet design which provides snap action. This type of level switch is mounted directly on the tank / vessel having horizontal nozzle as shown in figure. The tank / vessel connection must be located at the elevation where set level is to occur.
- Features
- Datasheet
- Informations
Spécifications
|
|
Type | Direct Insert Type |
Mounting Orientation |
Side Mounted / Top Mounted |
Float MOC | SS 304, SS 304L, SS 316, SS 316L, Monel, Titanium, Inconel 600, Hastelloy C, others on request |
Float Stem MOC |
SS 304, SS 304L, SS 316, SS 316L, Monel, Titanium, Inconel 600, Hastelloy C, others on request |
Flange MOC |
SS 304, SS 304L, SS 316, SS 316L, Monel, Titanium, Inconel 600, Hastelloy C, others on request |
Switch Type |
Snap Acting 1 SPDT / 2 SPDT Microswitch, 5A, 230 VAC |
Switch Housing |
Die Cast Aluminium Weatherproof to IP - 65 Die Cast Aluminium Explosion proof suitable for Group IIA, IIB Die Cast Aluminium Explosion proof suitable for Group IIC |
Electrical Connection |
¾"ET(F) |
Length below flange |
Upto 2000 mm (applicable for Top Mounted) |
Process Connection | Flanged in various sizes |
Minimum Specific Gravity |
0.8, others on request |
Maximum Pressure |
Up to 20 Kg/cm at ambient temperature, others on request |
Maximum Temperature |
Upto 150 C, others on request |
Télécharger la fiche technique (PDF Level Switch)