PRODUCTS
- Pressure measurement
- Thermometers & Temperature Sensors
- Flowmeters
- Level measurement
- Pulse Radar Level Transmitter
- Guided Wave Radar Level Transmitters
- Magnetostrictive Level Transmitter
- Ultrasonic Level Transmitters
- Level Gauge
- Capacitance Level Transmitter
- Magnetic Level Transmitter
- Hydrostatic pressure level transmitters
- Level Switch
- DISPLACER TYPE MAGNETIC LEVEL SWITCH - DSI
- Compact Displacer Level Switch for Water †CDSI
- VERTICAL LEVEL CONTROL - VLCI
- CHAMBER FLOAT MAGNETIC LEVEL SWITCH – CFSI
- Top Mounted Direct Insert Type
- Side Mounted Direct Insert Type
- External Cage Chamber SMLS/2000
- External Cage Chamber - TMLS/2000
- Top Mounted Float Operated-TMLS/4000
- Top Mounted Displacer Operated TMLS/3000
- Table instruments
- Supervision Software
- Industrial automation
- Calibration
- Accessories
External Cage Chamber SMLS/2000
Series : SMLS/2000
Prisma Instruments offers External Cage Type Level Switches for single level set point. This is trouble free, consistent and inexpensive solution to control Level in the tanks / vessels. GIC offers following Series of External Cage Chamber Type Level Switches.
Â
External Cage chamber SMLS/2000
This type of level switch consists of fabricated external cage with inlet-outlet process connections having fixed distance. The switch assembly is mounted horizontally on the external cage as shown in figure. The external cage type level switch is mounted outside the tank / vessel which significantly reduce effect of turbulence. It also provides ease of online maintenance without impeding the process conditions.
- Features
- Datasheet
- Informations
Spécifications
|
|
Type |
External Cage Chamber |
Series |
SMLS/2000 TLMS/2000 |
Float MOC |
SS 304, SS 304L, SS 316, SS 316L, Monel, Titanium, Inconel 600, Hastelloy C, others on request |
Float Stem MOC |
SS 304, SS 304L, SS 316, SS 316L, Monel, Titanium, Inconel 600, Hastelloy C, others on request |
Switch Type |
Snap Acting 1 SPDT / 2 SPDT Microswitch, 5A, 230 VAC |
Switch Housing |
Die Cast Aluminium Weatherproof to IP - 65 Die Cast Aluminium Explosion proof suitable for Group IIA, IIB Die Cast Aluminium Explosion proof suitable for Group IIC |
Electrical Connection |
¾"ET(F) |
External Cage Chamber |
CS, SS 304, SS 304L, SS 316, SS 316L, Monel, Titanium, Inconel, Hastelloy C etc. |
Centre To Centre Distance |
250 mm (Standard) |
Process Connection |
Flanged in various sizes |
Minimum Specific Gravity |
0.8, others on request |
Maximum Pressure |
Up to 20 Kg/cm at ambient temperature, others on request |
Maximum Temperature |
Up to 150°C, others on request |
Download the datasheet (PDFÂ External Cage Chamber SMLS/2000)