PRODUCTS
- Pressure measurement
- Thermometers & Temperature Sensors
- Flowmeters
- Level measurement
- Table instruments
- Supervision Software
- Industrial automation
- Calibration
- Accessories
Transparent Level Liquid Gauge
Réference: TLG
Liquid Level Gauge provides direct observation of liquid level in a tank / vessel. Rising and falling level of the liquid inside the tank / vessel can be observed through the glass assembled in the gauge. General Instruments Consortium offers liquid level gauges to suit the process requirements. If you notify process conditions i.e. Service, Pressure and Temperature etc., General can provide optimum solution to accomplish your process requirements and economy.
Â
Transparent Level Gauge
In this type of level gauge the liquid level is discriminated in the form of different transparency of the two media.This type of level gauge is mainly recommended for coloured liquids,steam-water and interface liquid level.
Â
The gauge consists of a body having machined to have a liquid chamber and one or more windows on both the sides of the gauge as shown in figure.On each window a transparent level glass is tightly pressed with sealing joints between the metallic covers and the body by means of Bolts and Nuts.
- Features
- Datasheet
- Informations
Spécifications
|
|
Type |
Reflex / Transparent |
Visibility |
Full Visibility / Partial Visibility |
Liquid Chamber |
Carbon Steel, SS 304, SS 304L, SS 316, SS 316L, Monel, Titanium, Inconel 600, Hastelloy C, PP, others on request |
Cover Plate |
Carbon Steel, SS 304, SS 304L, SS 316, SS 316L, Monel, Titanium, Inconel 600, Hastelloy C, PP, others on request |
Cushion |
CAF, PTFE, others on request |
Gasket |
CAF, PTFE, Graphoil, others on request |
Toughened Borosilicate |
Indigenous - Temperature Range upto 125 C |
Glass |
Klinger / Illmadur make or equivalent - Temperature Range upto 320 °C as per DIN 7080/7081, BS 3463, Ö-Norm M7353/7354, JIS B 8211, MIL-G-16356D |
Fasteners |
SS, ASTM A 193 Gr. B7 / A 194 Gr. 2H |
Isolation Valves |
Screwed OR Bolted Bonnet Offset Isolation Valves with Auto Ball Check Arrangement |
Process Connection |
From 15 to 50 mm Flanged / Upto 25 mm Screwed / Socket Welded others on request. |
Connection Orientation |
Top-Bottom Vertical / Side-Side Right / Side-Side Left / Side-Side Back (Applicable only for Reflex Level Gauge) |
Vent / Drain |
½" Plugged / ½" Needle Valve / ½" Ball Valve, others on request |
Scale |
Aluminium / SS engraved in mm. |
Optional |
Mica Shields, Non - Frost Extension, Heating Jacket, Illuminators Die Cast Aluminium Weatherproof to IP - 65 Illuminators Die Cast Aluminium Weatherproof to IP - 67 Illuminators Die Cast Aluminium Explosion proof Group IIA, IIB Illuminators Die Cast Aluminium Explosion proof Group IIC |
Centre to Centre Distance | 175 mm to 3000 mm, others on request |
Operating Pressure | For Reflex - 40 Kg/cm / For Transparent - 30 Kg/cm , others on request |
Operating Temperature | 300 C, others on request |
Download the datasheet (PDF Liquid Level Gauge -Â Transparent)